For proper hardware support you need to edit /boot/armbianEnv.txt and add: fdtfile=sun7i-a20-bananapi-m1-plus.dtb following by reboot.
network card is working bad. Use older builds.
For proper hardware support you need to edit /boot/armbianEnv.txt and add: fdtfile=sun7i-a20-orangepi.dtb following by reboot.
Gigabit Ethernet transfer rate is around 50% of its theoretical max rate (internal chip bus limitation)
due to bad PCB placement, there is some crosstalk between Wifi and VGA in certain videomodes make sure you power the board via power connector otherwise your USB port won’t be powered images are only for A20 based Cubietruck and do not work on H8 based so-called Cubietruck Plus (we don’t support CT+ anytime soon due too some …