helios4
By Jannis / General purpose • NAS / 0 Comments

Helios4

  • OMV (OpenMediaVault) can be installed on Armbian Buster or Bullseye with armbian-config -> software
clearfogbase
By Jannis / NAS • Networking • General purpose / 0 Comments

Clearfog base

 

To boot the image from USB flash:

  • Write the image to a USB flash drive
  • Insert the flash drive into the USB3.0 port
  • Load the modified u-boot (from the Armbian image) using the UART method
  • Stop the default boot sequence
  • Execute in u-boot prompt: run usbboot

To flash the image to eMMC:

  • Boot the image from USB flash
  • Write the image to eMMC using dd or other methods
  • Mount the eMMC partition and add a line emmc_fix=on to /boot/armbianEnv.txt file – this changes the DT during boot to switch from SD with card detect switch to a non-removable eMMC.
  • Unmount the eMMC partition and reboot

Please refer to this forum thread for the USB boot details and this thread for a discussion of known eMMC issues.

clearfogpro
By Jannis / NAS • Networking • General purpose / 0 Comments

Clearfog PRO

Notes:

There are some minor problems with specific mPCIe combinations. If you run into problems check this test matrix for some known working/not working combinations.

For more info please check docs.armbian.com

To boot the image from USB flash:

  • Write the image to a USB flash drive
  • Insert the flash drive into the USB3.0 port
  • Load the modified u-boot (from the Armbian image) using the UART method
  • Stop the default boot sequence
  • Execute in u-boot prompt: run usbboot

To flash the image to eMMC:

  • Boot the image from USB flash
  • Write the image to eMMC using dd or other methods
  • Mount the eMMC partition and add a line emmc_fix=on to /boot/armbianEnv.txt file – this changes the DT during boot to switch from SD with card detect switch to a non-removable eMMC.
  • Unmount the eMMC partition and reboot

Please refer to this forum thread for the USB boot details and this thread for a discussion of known eMMC issues.