Hold power button for about 7-8 seconds to power the device up. Boot log: http://ix.io/1r19
Known problems:
- HDMI is not working and will probably never,
- onboard wireless is too fragile, disabled by default.
- works: serial console, 8 cores, USB, SATA, HDMI, DRM video driver
- A83T chip isn’t SATA capable and therefore the SATA port is provided by a (very) slow GL830 USB-to-SATA-bridge
- https://forum.armbian.com/topic/474-banana-pi-m3/
- Some devices powers off on load
For proper hardware support you need to edit /boot/armbianEnv.txt and add:
fdtfile=sun7i-a20-bananapi-m1-plus.dtb
following by reboot.
