Flashing instructions:
-
- Hold MASK button and power the device up to enter MASKROM mode
- You will need mini loader binary for this device.
- Follow instruction for flashing with RKdevtools: https://docs.armbian.com/User-Guide_Getting-Started/#rockchip
Note:
- Booting is supported only from SD Card, NVMe, or eMMC.
- Before booting Armbian, you must erase the eMMC; otherwise, the system will not start.
- To boot from NVMe, the bootloader needs to be installed on either the eMMC or the SD Card using armbian-install or rkdeveloptool.