Radxa E52C
By Kat Schwarz / Networking / 0 Comments

Radxa E52C

Armbian 25.11.1
Trixie Minimal testing:		 Armbian 25.11.1 Noble
Minimal testing:
  • Boot okay, from sdcard
  • Reboot okay, from sdcard
  • Debug port okay, Speed: 1500000
  • USB port is okay
  • Gigabit Ethernet LAN is okay, Iperf3 ~960 Mbit/s
  • Gigabit Ethernet WAN is okay, Iperf3 ~940 Mbit/s
  • Shutdown okay
  • Boot okay, from sdcard
  • Reboot okay, from sdcard
  • Debug port okay, Speed: 1500000
  • USB port is okay
  • Gigabit Ethernet LAN is okay, Iperf3 ~960 Mbit/s
  • Gigabit Ethernet WAN is okay, Iperf3 ~940 Mbit/s
  • Shutdown okay
radxa-rock-5c
By Kat Schwarz / General purpose • Desktop / 0 Comments

Radxa Rock 5C

Armbian 25.11.1
Trixie Minimal / IOT testing:		 Armbian 25.11.1 Noble
Gnome testing:
  • Boot okay, from sdcard
  • HDMI video (text) is okay
  • Audio not tested on minimal image
  • USB2 ports are okay
  • USB3 ports are okay
  • Gigabit Ethernet is okay, Iperf3 ~940 Mbit/s
  • Wireless okay, Iperf3 ~180 Mbit/s
  • Reboot and shutdown okay
  • Boot okay, from sdcard
  • HDMI video is okay
  • HDMI audio is okay
  • Jack audio headphone out is okay
  • Jack audio mic in is okay
  • USB2 ports are okay
  • USB3 ports are okay
  • Gigabit Ethernet is okay, Iperf3 ~950Mbit/s
  • Wireless okay, Iperf3 ~174 Mbit/s
  • Bluetooth okay
  • Reboot and shutdown okay
orangepir1-pluslts
By Kat Schwarz / General purpose • IOT • Networking / 0 Comments

Orange Pi R1+ and LTS

  • Images for non LTS version can be downloaded here
  • There is currently a known issue that may affect this board on some IPv4 only networks. Symptoms are variable, from intermittent drop-outs and slow-downs to total loss of one NIC or total loss of networking. The issue can be completely eliminated by disabling IPv6. Don’t try to do this through armbian-config as this method does not work. IPv6 must be disabled by adding a line extraargs="ipv6.disable=1" to /boot/armbianEnv.txt
  • Device tree overlays to enable uart1 and i2c0 are available in Armbian 23.02.
orangepi-r1plus
By Kat Schwarz / Networking / 0 Comments

Orange Pi R1+

  • There may be a known issue that could affect this board on some IPv4 only networks. Symptoms are variable, from intermittent drop-outs and slow-downs to total loss of one NIC or total loss of networking. The issue can be completely eliminated by disabling IPv6. Don’t try to do this through armbian-config this method does not work. IPv6 must be disabled by adding a line extraargs="ipv6.disable=1" to /boot/armbianEnv.txt