![khadas-vim4](https://cdn.armbian.com/wp-content/uploads/2023/08/khadas-vim4.png)
![khadas-vim4](https://cdn.armbian.com/wp-content/uploads/2023/08/khadas-vim4.png)
![](https://cdn.armbian.com/wp-content/uploads/2023/08/KhadasVIM1S-4.png)
![khadas-vim3-l](https://cdn.armbian.com/wp-content/uploads/2023/06/khadas-vim3-l.png)
Installation:
- Download Khadas Rescue system (flash to SD card, insert, power on, hold FUNCTION and short press RESET button)
- Download Armbian image and place it to the USB drive (copy .xz or .img file, do not flash with Etcher)
- Boot into Khadas OOWOW and install to eMMC by selecting image from USB drive
![](https://cdn.armbian.com/wp-content/uploads/2023/03/khadas-edge2.png)
-
copy your OS image into any removable storage SD / USB Flash , etc (formatted by exfat or ext2/3/4 or fat)
-
start OOWOW by press FUNCTION + RESET
-
exit from wizard
-
plug removable storage with OS image
-
choose this image to write by menu → Write image to eMMC and up to .. mounts
![](https://cdn.armbian.com/wp-content/uploads/2021/06/khadas-edge-v.png)
![khadas-vim3](https://cdn.armbian.com/wp-content/uploads/2021/06/khadas-vim3.png)
![](https://cdn.armbian.com/wp-content/uploads/2021/07/khadas-vim2.png)
Serial console:
Blue color line: Tool Pin TXD, orange color: Tool Pin RXD, black: Tool Pin GND
How to boot from SD card? After power on, quickly press the Function key 3 times in 2 seconds, then release the key. More at official manual.
![khadas-vim1](https://cdn.armbian.com/wp-content/uploads/2021/07/khadas-vim1.png)
To be able to boot Armbian SD card image and install Armbian to eMMC, use one of the methods to boot into upgrade mode. If you have most recent board revision (1.4 ->) then you only need to quickly press the function key (middle) 3 times in 2 seconds. Release and boot will proceed from SD card. Then use nand-sata-install utility to flash to eMMC.
Serial console:
Blue color line: Tool Pin TXD, orange color: Tool Pin RXD, black: Tool Pin GND